Laser cutter has a wrong cutting/engraving size

If Laser cutter has a wrong cutting/engraving size, generally the pulse setting of the X/Y axis motors is wrong.
Please follow the below steps to solve the problem
Please draw a 100x100mm square using the cut mode and send to your laser cutter and cut the square.
100*100mm


Let’s say the actual size of the square measured is 98x95mm
98*95mm


How to fix this problem?
Please follow the pictures below to find the “Vender settings “and then input the password. Click "Read" first.Now select the X/Y axis and revise the step length,input the numbers as the below, and the software will count the correct number automatically,then please click"Write"and then exit.






After “Reset” on display and draw a new 100×100mm square, if the size is correct, the problem is fixed. If not, please repeat the step 1-3.




Useful link:  #Laser cutter reviews      #Laser cutter       #Laserengraverforum

Comments

Post a Comment

Popular posts from this blog

How to install the CorelDraw plugin for RDWorks

Image
1. Firstly run CorelDraw and set the parameter following below instructions: 2. After that, close CorelDraw. Double click to open RDWorks installation program. Choose the type of CorelDraw_Laser (be sure the RDWorks main program has been already installed), and then tick the item RDworks, as shown below: Click “install” and wait to compete the installation. 3. Again run CorelDraw. Choose and enter “Run Macro”(Tools > Marcos>Run Macro). Choose Marcos in: [Globalmacros (RDWorks15/16/17V8.gms)] > [RDWorksV8.UserInit]. Click run. 4. There will appear two extra buttons . Move them to anywhere you want them to be. After finish drawing the graphics, click “Laser running” to directly import the graphics into RDworks. Useful link: #laser cutter reviews
Read more

How to import PDF files into RDWorks

Image
1. RDWorks cannot read PDF and open it directly. 2. Use CorelDraw to open/import PDF file. Then save the graphic as DXF file. Like below: 3. Then RDWorks can read the DXF file, Just import the DXF file into RDWorks directly. 4. The other way is open/import PDF file with CorelDraw，use the plugin button "Laser Running" to import the graphic into RDWorks. Useful Links: #laser cutter reviews     #laser machine
Read more

Why does the cutting and engraving graphics reverse (mirror)

Image
This problem may cause from improper setting of the software. Please start up the laser software RDWorksV8. And then click “Config” – “system setting” on the menu bar. This dialog box appears. Make sure “Axis X mirror” is unticked, and “Axis Y Mirror” is must ticked. If your setting is different from this, this is the problem why your cutting/engraving reverse. Just reset the config as above.
Read more