Laser Cutter TroubleShooting

1. RDWorks cannot read PDF and open it directly. 2. Use CorelDraw to open/import PDF file. Then save the graphic as DXF file. Like below: 3. Then RDWorks can read the DXF file, Just import the DXF file into RDWorks directly. 4. The other way is open/import PDF file with CorelDraw，use the plugin button "Laser Running" to import the graphic into RDWorks. Useful Links: #laser cutter reviews     #laser machine

When I use laser cutter , I'd like to cut a Rectangle at 30x30mm, however, it become 30x60.2 in simulation and in laser, Please make sure "Enable rotate engrave" is not ticked. Useful link: Laser cutter reviews

If the software shows the below information: Please try the following solutions: A.Please check if the USB cable is loose or not. USB cable B.Please check if the USB is connected to the PC interface on the machine correctly C.Try connect to another USB interface on the computer D.Change another USB cable E.If you use a laptop computer, please cancel the energy saving mode. G.Reinstall the laser cutting machine software and drivers Useful link:  # Laser cutter reviews       # Laser cutter        # Laserengraverforum

If Laser cutter has a wrong cutting/engraving size, generally the pulse setting of the X/Y axis motors is wrong. Please follow the below steps to solve the problem Please draw a 100x100mm square using the cut mode and send to your laser cutter and cut the square. 100*100mm Let’s say the actual size of the square measured is 98x95mm 98*95mm How to fix this problem? Please follow the pictures below to find the “Vender settings “and then input the password. Click "Read" first.Now select the X/Y axis and revise the step length,input the numbers as the below, and the software will count the correct number automatically,then please click"Write"and then exit. After “Reset” on display and draw a new 100×100mm square, if the size is correct, the problem is fixed. If not, please repeat the step 1-3. Useful link:  # Laser cutter reviews       # Laser cutter        # Laserengraverforum

This problem is due to the different movement of the belt on both sides of the Y-axis, which lead the belt is not synchronized. 1. The coupling loose 2. The gear of transmission shaft loose 1. The coupling loose; ① Please check if one of couplings is loose like below: If yes, please tighten it in clockwise with M5 Allen wrench. 2. The gear of transmission shaft loose Please check which side of gear of transmission shaft is unfixed like below: If the gear loose that mean the transmission shaft module is bad please contact with us. Besides,there are another ways to improve the cutting problem by adjusting software. 1. Reduce the User setting of Go Acc factor and Speed factor to minimize the impact Like below: If nothing,please follow next step to tick the option of "Backlash reapy optim" 2. An option of software for optimizing that problem. Like below: Then re-download the file to laser cutter and test again. Useful link:  # Lase...

I believe that many friends who have laser cutting machines will encounter such problems. The quality of cutting products or engraving products made with laser cutter is very poor. Why is the quality of my laser cutting machine so bad? Is there a problem with the quality of my laser cutting machine? Sometimes this may be one of the factors. But today I will explain the reasons for this low quality. 1, the reason that affects the quality of cutting First, we need to know the measure of cutting quality. 1.Cutting surface roughness Rz Rz is one of the basic evaluation parameters for surface roughness that is widely used. Rz is more intuitive, but only reflects the peak-to-valley height of the surface profile being measured.Rz commonly used in the range of 0.1 ~ 25μm. Different roughness 2.Cutting slag size 3.Trimming verticality and slope u 4.Cutting edge rounded size r 5.Drag after the stripe n 6.Flatness F The related concepts above can be ch...